Powerbeats 3 Wireless - Hard Reset & Pairing

Please follow the video below to hard reset your headphones:


1) Hold down both the power button and volume down button for 10 seconds.
2) Release the buttons when the light starts to flash. You can use your headphones now. You will have to re-pair your headphones again. 

Pairing Instructions:

iPhone, iPad, or iPod using iOS 10 or later:

1) Open Control Center by swiping up from the bottom edge of the screen.
2) Swipe to the side in Control Center to show the Now Playing card.
3) Tap the device name in the corner of the card, then choose your earphones from the list of playback devices. If you don't see your earphones, follow the steps for all other devices, below.

Android devices:
1) Download the Beats app for Android.
2) Press the power button on your earphones for 5 seconds. When the indicator light flashes, your earphones are discoverable.
3) Select Connect on your Android device.

All other devices:
1) Go to Bluetooth Settings on your device. 
2) Select your headphones from the list of Bluetooth devices. If you don't see your earphones after a few seconds, press and hold the power button for 5 seconds.

Hard Reset Instructions:


1) Hold down both the power button and volume down button for 10 seconds.
2) When the LED indicator light flashes, release the buttons. Your earphones are now reset and ready to be set up with your devices again.

Pairing Instructions:

iPhone, iPad, or iPod using iOS 10 or later:
1) Open Control Center by swiping up from the bottom edge of the screen.
2) Swipe to the side in Control Center to show the Now Playing card.
3) Tap the device name in the corner of the card, then choose your earphones from the list of playback devices. If you don't see your earphones, follow the steps for all other devices, below.

Android devices:

1) Download the Beats app for Android.
2) Press the power button on your earphones for 5 seconds. When the indicator light flashes, your earphones are discoverable.
3) Select Connect on your Android device.

All other devices:
1) Go to Bluetooth Settings on your device. On your Mac, you can just click the Bluetooth icon in the menu bar.
2) Select your earphones from the list of Bluetooth devices. If you don't see your earphones after a few seconds, press and hold the power button for 5 seconds.

 

Click here to view our Beats Powerbeats headphone inventory. 

 

Beats by dre

Leave a comment

All comments are moderated before being published